QSC RMX 5050 5,000 Watt Power Amp for sale in Englishtown, NJ
With amazing audio performance and road-proven durability, the QSC RMX 5050 5,000 Watt Power Amp is suited for a wide range of sound reinforcement applications. Features a 3-tier, Class H design. Extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. Uses the best available components.Features balanced 1/4" TRS, XLR, and barrier strip inputs, binding posts and Neutrik Speakon outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance. With high-current toroidal transformers for greater 2-ohm power and low noise.Independent user-defeatable clip limiters reduce distortion.Selectable low-frequency filters (30Hz or 50Hz) protect speakers and increase headroom.Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility.Binding post and Neutrik Speakon outputs.Has front-mounted gain controls for easy access.Signal and Clip LED indicators to monitor performanceACCESSORIESSTEREO MODE, Both Channels Driven8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts8 ohms EIA 1 kHz 0.1% THD 1100 Watts4 ohms EIA 1 kHz 0.1% THD 1800 Watts2 ohms EIA 1 kHz 1% THD 2500 WattsBRIDGE-MONO MODE8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts8 ohms EIA 1 kHz 0.1% THD 3600 Watts4 ohms EIA 1 kHz 1% THD 5000 WattsDistortion (SMPTE-IM) Less than 0.02%Distortion (Typical)20Hz-20kHz: 10dB below rated power1kHz and below: full rated powerLess than 0.02%Less than 0.02%Frequency Response20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dBDamping Factor Greater than 250 @ 8 ohmNoise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load)Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohmsNOTE: The RMX 5050 requires 20A 120V service. Features Extremely high power Advanced thermal performance delivers higher continuous power in 2-ohms stereo or 4-ohms bridged applications Dual mono, high current power supply for increased reliability and performance 3RU chassis is 16" deep. High-current toroidal transformers for greater 2-ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30Hz or 50Hz) protect speakers and increase headroom Balanced 1/4" (6.3mm) TRS, XLR, and barrier strip inputs for maximum flexibility Binding post and Neutrik Speakon outputs Front-mounted gain controls for easy access Signal and Clip LED indicators to monitor performance 3-year warranty. ACCESSORIES Specifications STEREO MODE, Both Channels Driven 8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts 4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts 2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts 8 ohms EIA 1 kHz 0.1% THD 1100 Watts 4 ohms EIA 1 kHz 0.1% THD 1800 Watts 2 ohms EIA 1 kHz 1% THD 2500 Watts BRIDGE-MONO MODE 8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts 8 ohms EIA 1 kHz 0.1% THD 3600 Watts 4 ohms EIA 1 kHz 1% THD 5000 Watts Distortion (SMPTE-IM) Less than 0.02% Distortion (Typical) 20Hz-20kHz: 10dB below rated power 1kHz and below: full rated power Less than 0.02% Less than 0.02% Frequency Response 20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB 5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB Damping Factor Greater than 250 @ 8 ohm Noise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load) Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms
|
|
|